ccd multichannel detector heads designed for front-illuminated ccd area image sensors c7020/c7021/c7025 series www.hamamatsu.com 1 the c7020/c7021/c7025 series are high sensitivity multichannel detector heads intended for use with front-illuminated ccd area image sensors (s9970/s9971/s9972/s9973 series). the c7020 series is designed for non-cooled ccd, while the c7021/c7025 se- ries for thermoelectric cooled ccd. all of the c7020/c7021/c7025 series contain a low-noise driver circuit that operates on inp ut of simple external signals. mounting holes are provided on the front panel for attaching to other devices such as spectrometers. the c7021/c7025 series also include a highly stable temperature control cir cuit that cools the sensor to a preset temperature ( ts=-10 c) as soon as the power is turned on. if the cooler fails and causes overheating, the internal protection circuit automaticall y turns off the power to ensure safety. despite the compact size, the housing con guration is designed for good heat dissipation. as an option, hamamatsu also provides the c7557-01 controller for multichannel detector heads. using the dedicated software for the c7557-01 allows easy control and data acquisition of a multichannel detector head from a pc. features applications designed for front-illuminated ccd area image sensor * 1 c7020/-02: for non-cooled type c7021/-02, c7025/-02: for te-cooled types fluorescence spectroscopy raman spectroscopy other low light level detection highly stable temperature controller (c7021/-02, c7025/-02) cooling temperature: xed at -10 0.05 c line binning operation * 2 /area scanning operation simple signal input operation compact con guration driver circuit for low noise ccd operation selection guide the table below shows ccd area image sensors applicable for c7020/c7021/c7025 series. since c7020/c7021/c7025 series do not include a ccd area image sensor, so select the desired sensor and order it separately. type no. ccd area image sensor type no. number of pixels number of active pixels active area [mm (h) mm (v)] c7020 s9970-0906 532 64 512 60 12.288 1.440 s9970-1006 1044 64 1024 60 24.576 1.440 s9970-1007 1044 128 1024 124 24.576 2.976 s9970-1008 1044 256 1024 252 24.576 6.048 c7020-02 s9972-1007 1044 128 1024 124 24.576 2.976 s9972-1008 1044 256 1024 252 24.576 6.048 c7021 s9971-0906 532 64 512 60 12.288 1.440 s9971-1006 1044 64 1024 60 24.576 1.440 s9971-1007 1044 128 1024 124 24.576 2.976 c7021-02 s9973-1007 1044 128 1024 124 24.576 2.976 c7025 s9971-1008 1044 256 1024 252 24.576 6.048 c7025-02 s9973-1008 1044 256 1024 252 24.576 6.048 * 1: the fft-ccd (full frame transfer ccd) has charge transfer sections that are also used as light receiving areas, being differ ent from interline transfer ccd (it-ccd) commonly used in video cameras. compared to the it-ccd, the fft-ccd offers advantages of low dark current, a 100 % open area ratio and low image lag. * 2: the fft-ccd area image sensor can be operated like a linear image sensor having a large active area by transferring all the pixel signals in the vertical direction to the horizontal register (this is referred to as line binning).
ccd multichannel detector heads c7020/c7021/c7025 series 2 absolute maximum ratings electrical characteristics (ta=25 c, v d1 =+5 v, v a1 +=+15 v, v a1 -=-15 v, v a2 =+24 v, v d2 =+5 v, vp=+5 v, v f =+12 v, unless otherwise noted) electrical and optical characteristics (ta=25 c, ts= -10 c, v d1 =+5 v, v a1 +=+15 v, v a1 -=-15 v, v a2 =+24 v, v d2 =+5 v, vp=+5 v, v f =+12 v, unless otherwise noted) parameter symbol min. typ. max. unit supply voltage (for digital circuitry) v d1 -0.5 - +7 v supply voltage (for analog circuitry) v a1+ - - +18 v a1- - - -18 v a2 - - +30 supply voltage * 3 v d2 --+7 vp - - +7 v f - - +14 digital input voltage - - - v d (1, 2) operating temperature c7020/-02 topr 0 - +50 c c7021/-02, c7025/-02 +10 - +35 * 3 storage temperature c7020/-02 tstg -20 - +70 c7021/-02, c7025/-02 0 - +50 parameter symbol min. typ. max. unit digital input high level v ih +2.0 - vd (1, 2) v low level v il -0.5 - +0.8 v clk frequency fclk - - 1 mhz data video readout frequency fv - - f clk /4 hz start pulse width tst 1/f clk --s digital output high level (io=-6 ma) v ih +2.0 - - v low level (io=+6 ma) v il - - +0.8 v power supply operating conditions voltage digital circuitry v d1 +4.75 +5.0 +5.25 v analog circuitry v a1+ +14.5 +15.0 +15.5 v v a1- -14.5 -15.0 -15.5 v v a2 +23.5 +24.0 +24.5 v other * 4 v d2 +4.75 +5.0 +5.25 v vp +4.75 +5.0 +5.25 v v f +11.75 +12.0 +12.75 v current v d1 (+5 v) - - - +200 ma v a1+ (+15 v) - - - +100 ma v a1- (-15 v) - - - -100 ma v a2 (+24 v) - - - +30 ma v d2 (+5 v) * 4 - - - +30 ma vp (+5 v) * 4 - - - +2.5 a v f (+12 v) * 4 - - +100 - ma parameter symbol c7020, c7021, c7025 c7020-02, c7021-02, c7025-02 unit min. typ. max. min. typ. max. spectral response range - 400 1100 -- 400 1100 - nm full well capacity vertical fw 150 300 - 120 240 - ke - horizontal 300 600 - 240 480 - conversion gain * 5 sv -15- -12- v/e - dark current * 6 c7020/-02 ds - 200 3000 - 2000 30000 e - /pixel/s c7021/-02, c7025/-02 - 3 45 - 30 450 readout noise nr - 20 45 - 60 120 e - rms dynamic range line binning dr - 30000 - - 8000 - - area binning - 15000 - - 4000 - - photo response non-uniformity * 7 prnu - - 10 - - 10 % * 3: the maximum value may be lower, depending on the drive frequency and the number of sensor pixels. * 4: c7021/c7025 series * 5: including the circuit gain * 6: at mpp mode. vertical register value. the actual value equals the sum of the vertical direction because of the binning opera tion. * 7: measured at 50 % of the full well capacity
ccd multichannel detector heads c7020/c7021/c7025 series spectral response (without window) device structure (front-illuminated ccd area image sensor) 50 40 30 20 10 0 200 400 600 wavelength (nm) 800 1000 1200 quantum efficiency (%) (typ. ta=25 c) (typ. ta=25 c) s9970/s9971 series s9972/s9973 series uv coated type ...... ...... ...... v 1h ig1v ig2v isv ss rg rd os od og sg d1 d2 d3 d4 d5 d6 d7 d8 d9 d10 d11 d12 d13 d14 d15 d16 d17 d18 d19 d20 1 2 3 45 6 20 23 22 24 16 15 v=60, 124, 252 h=512, 1024 ish ig1h ig2h p1h p2h 13 12 11 10 9 blank (4 pixels) blank (4 pixels) optical black (4 pixels) optical black (4 pixels) signal output (512 or 1024 pixels) isolation (2 pixels) isolation (2 pixels) tg p1v 14 p2v kmpdb0257ed kmpdc0015eb speci cations for temperature controller (c7021/-02, c7025/-02) (ta=25 c, v d1 =+5 v, v a1+ =+15 v, v a1- =-15 v, v a2 =+24 v, v d2 =+5 v, vp=+5 v, v f =+12 v) parameter * 8 symbol min. typ. max. unit cooling temperature ts -11 -10 -9 c temperature control range ts -0.05 - +0.05 c power dissipation of te-cooler element pp - - 7 w cool down time to reset temperature to - - 5 min setting temperature for overheat protection to - +45 - c * 8: other functions include error display, automatic power off, and detection of electrical opens and shorts by the thermosensor . 3
ccd multichannel detector heads c7020/c7021/c7025 series block diagram (c7021 series, c7025 series) timing chart led th.h p+ p- th+ temperature controller * timing generator d. gnd a. gnd clk start trigger eos te-cooler vdd ccd area image sensor s9971/s9973 series buffer low-pass filter data video pre-amp driver regulator vee clamp od rd og ig1h, ig2h ig1v, ig2v p1v, p2v, tg p1h, p2h sg rg ss, isv, ish os th- mode select vp (+5v) p. gnd v d2 (+5v) d. gnd v f (+12v) f. gnd temp monitor inverter cooling control v d1 (+5v) v a1+ (+15v) v a1- (-15v) v a2 (+24v) kaccc0456ea * the c7020 series does not include the temperature controller and te-cooler. v-ch1 v-ch2 v-ch(m) h-ch1 h-ch2 start clk p1v p2v p1h p2h sg rg clamp eos trigger data video m=64, 128, 256 n=532, 1044 v-ch1--v-ch2, v-ch (m-3)--v-ch (m): isolation pixels h-ch1--h-ch4, h-ch (n-3)--h-ch (n): blank pixels h-ch5--h-ch10, h-ch (n-9)--h-ch (n-4): isolation pixels tg kaccc0457ea h-ch(n) h-ch(n-9) h-ch(n-10) h-ch11 h-ch10 kaccc456ea kaccc0457ea 4
ccd multichannel detector heads c7020/c7021/c7025 series pin no. terminal name description 1 mode select digital input signal used to select between the line binning operation and area scanning operation hcmos compatible high level or left open: line binning operation low level: area scanning operation 2 data video analog video output. positive polarity 3 v a1+ (+15 v) analog power supply 4 v a1- (-15 v) analog power supply 5 v d1 (+5 v) digital power supply 6 start digital input signal for initializing the circuit. hcmos compatible. positive logic. the interval of the start pulses determines the integration time of the ccd image sensor. 7 clk digital input signal for operating the circuit. hcmos compatible. rising edge operation. 8 eos digital input signal for indicating end-of-scan of the image sensor. hcmos compatible. negative logic. 9 a. gnd analog ground 10 a. gnd analog ground 11 v a2 (+24 v) analog power supply 12 d. gnd digital ground 13 d. gnd digital ground 14 d. gnd digital ground 15 trigger digital output signal for a/d conversion. hcmos compatible. positive logic. pin assignment of "signal i/o" connector pin assignment of "te control i/o" connector (c7021/-02, c7025/-02) pin no. terminal name description 1 v d2 (+5 v) digital power supply 2 temp monitor analog output signal of the temperature of the ccd image sensor 3 cooling control digital input signal for starting to cool down. hcmos compatible. high level or left open: cooling low level: stand-by 4 vp (+5 v) power supply for the thermoelectric cooler in the ccd image sensor (please use awg 18 wire.) 5 v f (+12 v) power supply for cooling fan 6 d. gnd ground 7 d. gnd ground 8 p. gnd power supply return of the thermoelectric cooler mounted in the ccd image sensor (please use awg 18 wire.) 9 f. gnd power supply return for cooling fan available for using same power supply (+5 v) for ?+v d2 " and "+vp". caution: do not connect "v d2 " and "vp" together on the backside of the 9-pin d-sub connector. these may be connected (shorted) at the power supply end, not 9-pin d-sub connector. kaccc0069ea kaccc0075ea 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1 2 3 4 5 6 7 8 9 15-pin d-sub connector 9-pin d-sub connector 5
ccd multichannel detector heads c7020/c7021/c7025 series kacca0058eb kacca0059ec kacca0060ec dimensional outlines (unit: mm) c7020/-02 c7021/-02 c7025/-02 100.0 90.0 34.0 80.0 60.0 82.0 62.0 11.0 50.0 50.0 0.8 0.5 (4 ) m3 depth 4 focal plane focal plane 100.0 90.0 77.0 focal plane 34.0 35.0 80.0 60.0 82.0 62.0 11.0 50.0 50.0 focal plane 2.9 0.5 (4 ) m3 depth 4 100.0 90.0 77.0 34.0 35.0 80.0 60.0 82.0 62.0 11.0 50.0 50.0 2.0 0.5 (4 ) m3 depth 4 focal plane focal plane 6
ccd multichannel detector heads c7020/c7021/c7025 series pin connections power supply v f (+12 v) f. gnd vp (+5 v) p. gnd v d2 (+5 v) d. gnd controller cooling control d. gnd te controller power supply i/o signal v d1 (+5 v) d. gnd v a1 + (+15 v) v a1 - (-15 v) v a2 (+24 v) a. gnd pulse generator clk d. gnd start d. gnd controller mode select d. gnd s/h or a/d analog input a. gnd s/h input d. gnd oscilloscope ch1 gnd ext. trig gnd 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 kaccc0076ec multichannel detector head controller c7557-01 the c7557-01 is speci cally designed for basic control in multichannel photometry. when connected to a hamamatsu multichannel detector head and pc, the c7557-01 allows easy control of the detector head and data acquisition by using dedicated software that comes with the unit. suitable multichannel detector head c7020/-02, c7021/-02, c7025/-02, c7040, c7041, c7043, c7044, c7180, c7181, c8061-01, c8062-01, c10150, c10151 c5964 series, c8892 accessories spare fuse (2.5 a) ac cable 2 to 3 conversion adapter usb cable detector head connection cables (for ?signal i/o? and ?te control i/o? terminal of multichannel detector head) cd-r (mcd usb driver, software, operation manual) mos adapter 7
www.hamamatsu.com information furnished by hamamatsu is believed to be reliable. however, no responsibility is assumed for possible inaccuracies or omissions. specifications are subject to change without notice. no patent rights are granted to any of the circuits described herein. ?200 8 hamamatsu photonics k.k. hamamatsu photonics k.k., solid state division 1126-1 ichino-cho, higashi-ku, hamamatsu city, 435-8558 japan, telephone: (81) 53-434-3311, fax: (81) 53-434-5184 u.s.a.: hamamatsu corporation: 360 foothill road, p.o.box 6910, bridgewater, n.j. 08807-0910, u.s.a., telephone: (1) 908-231-0 960, fax: (1) 908-231-1218 germany: hamamatsu photonics deutschland gmbh: arzbergerstr. 10, d-82211 herrsching am ammersee, germany, telephone: (49) 08152 -3750, fax: (49) 08152-2658 france: hamamatsu photonics france s.a.r.l.: 19, rue du saule trapu, parc du moulin de massy, 91882 massy cedex, france, teleph one: 33-(1) 69 53 71 00, fax: 33-(1) 69 53 71 10 united kingdom: hamamatsu photonics uk limited: 2 howard court, 10 tewin road, welwyn garden city, hertfordshire al7 1bw, unit ed kingdom, telephone: (44) 1707-294888, fax: (44) 1707-325777 north europe: hamamatsu photonics norden ab: smidesv?gen 12, se-171 41 solna, sweden, telephone: (46) 8-509-031-00, fax: (46) 8 -509-031-01 italy: hamamatsu photonics italia s.r.l.: strada della moia, 1/e, 20020 arese, (milano), italy, telephone: (39) 02-935-81-733, fax: (39) 02-935-81-741 cat. no. kacc1035e10 dec. 2008 dn ccd multichannel detector heads c7020/c7021/c7025 series connection example ac cable (100 to 240 v; included with the c7557-01 ) pc (windows 2000/xp/vista) c7557-01 usb cable (included with the c7557-01) image sensor + multichannel detector head (usb 2.0) shutter * timing pulse dedicated cable (included with the c7557-01) * shutter, etc. are not available. te control i/o signal i/o power trig. kaccc0402ea 8
|
